ab 0,22€
Inexpensive and solid option for bolting hand rims with lugs to the drive wheel if there are no threaded rivets in the rim.
The nuts are self-locking due to a plastic insert. The nuts have a low form with an overall height of 5 mm and an 8 mm hexagon socket. They can be mounted with a socket, open-ended spanner or ring spanner with 8 mm width across flats.
Available in galvanised steel or A4 stainless steel.
Galvanised steel is sufficiently resistant to corrosion for most applications. A4 stainless steel should be used where there is an increased risk of corrosion, for example in coastal regions, as this material is resistant to acid and seawater.
The nuts are shiny silver and have a weight of 1.0 g / piece.
We recommend the use of (underlay) discs for optimum load distribution and to avoid surface damage to the push rim straps!
The maximum tightening torque is determined by the screw material. As a guideline, we recommend a maximum tightening torque of 5 Nm for M5 screws if there are no other specifications.
| Product name | M5 hexagon nut self-locking, low form |
|---|---|
| Form | Hexagon nut self-locking, low form according to DIN 985 |
| Material | Steel, galvanised, stainless steel A4 |
| Colour | silver |
| Weight | 1,0 g |
| Quantity | 1 piece, 12 pieces, 24 pieces |
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
