Spinergy® spoke counterholder

Description

This spoke counterholder is needed to centre Spinergy® wheels or to exchange spokes.

With the help of the spoke retainer, the spokes are secured on the rim side against twisting so that they cannot twist when the spoke nuts are tightened or loosened (using a nipple tensioner).

It fits both the (thinner) 3 mm PBO™ spokes and the (thicker) 4 mm PBO™ spokes.

For this purpose, it has the Spinergy-specific contour for the 3 mm spokes at one end. The other end has a 1/4″ jaw for the 4 mm spokes.

Note: The appropriate nipple tensioner/socket spanner for the spoke nut is always required for centring. (1/4″ for 3 mm spokes; 5/16″ for 4 mm spokes)